Welcome to contact to us as below
Our factory Address: Luowang countryside,Xiangfu district kaifeng city,Henan province ,China
Contact : Alice
Cell:+ 86 18605486984
Wechat : 18605486984
Email:info@xxballs.com
Hot Tags: solid delrin ball, China solid delrin ball manufacturers, suppliers, factory
Hot Tags: nylon 66 plastic ball, China nylon 66 plastic ball manufacturers, suppliers, factory
What is a Nylon Spheres?
Nylon Balls are used in a variety of bearing, and seal applications. These balls are precision ground for tight tolerance & are made of solid, high-quality thermoplastic.
Semicrystalline thermoplastic Nylon 6/Nylon 6.6 polymer balls, they provide low weight, high corrosion, wear and abrasion
resistance. They are auto lubricant and with good ductility, toughness and electric insulating properties. Useful even for high
temperature applications. Nylon balls are insolvable into diluted mineral acids and in most organic acids. They are resisting to
alkalis, petroleum products, greases, inorganic salt solutions, low gradation alcohols, motor oil, transmission fluids, methanol,
ketones, esters. They do not resist to strong acids and basis.
|
Product Name |
Nylon (Polyamide) Plastic Balls |
|
Material |
NYLON 6/NYLON 6.6 (PA 6/PA 6.6) |
|
Size |
1.5mm-50mm |
|
Grade |
G0-G3 (0.01-0.05mm) |
|
Color |
colorful Upon request, natural |
|
Density |
Around: 1.1g/cm3 |
|
MOQ |
10000pcs |
|
Application |
Special valves, low load bearings, flow meters, switches, handgrips, medical and industrial applications. |
Our factory other material plastic ball
POM PLASTIC BALL (Delrin).
Densiry:1.4g/cm^3
Grade:G0-G3(0.01-0.05mm)
Feature:similar to nylon slightly, harder larger density
low water absorption,the most hard and wear resistant materials.Applications:POM ball table,drawer slide device bearings, rollers, valves, electronic apparatus, sailing apparatus.
PP PLASTIC BALL(Polypropylene)
Densiry:Around 0.88g/cm^3
Grade:G0-G3(0.01-0.05mm)
Feature:good resistance and chemical resistance,
density less than water,the highest melting point
Applications:used for transfusion, level calibration indicator..
PTFE PLASTIC BALL
Densiry:Around 2.2g/cm^3
Grade:G0-G3(0.01-0.05mm)
Feature:excellent chemical stability, resistance to corrosion,sealing, high lubricity non-tackiness,most corrosive resistant possessed electrically nsulating material
Applications:Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument.
Polyetheretherketone (PEEK) plastic ball
Densiry:Around 1.3g/cm^3
Grade:G0-G3(0.01-0.05mm)
Feature:Low creep,Excellent friction performance,Especially wearable,Excellent chemical resistance,Flame retardant,Non-toxic
Applications:High-end machinery and aviation technology
Company profile
About US
With more than 25 years experience, Kaifeng Bell is a professional solid plastic ball manufacturer in China. Material : Acetal (POM), Polypropylene (PP) ,Nylon (PA PA66) ,PTFE(Teflon) ,PS ,PEEK, Acrylic (PMMA) , etc. Size from 0.8mm to 100mm. Grade G0 G1 G2
We have two factories to produce our balls , one is Located in Henan province (cover 10000 square meters and with more than 200 sets machines), another is located in Shandong province (cover 5000 square meters and with more than 50 sets machines) As plastic ball supply ,we also produce (304 316 316L 440C 420C) stainless steel ball, brass copper ball,(soda-lime&borosilicate) glass ball,Ceramic ball ,Tungsten Carbide Ball, sattelite steel ball,Aluminum Balls . Sizefrom 0.3mm to 100mm Grade from G5 to G1000
Quality Assurance
Our technical engineer has over 30 years experience . After finished to produce balls, we will take sample balls from the batch are sent for final audit to check for surface roughness, roundness, waviness, lot size variation and hardness in a sophisticated laboratory, according to specified control plans and dock audit procedures. Once all requirements are met, a test certificate is then prepared for the customer
Nylon Spheres FAQ
1.What is a nylon ball?
Nylon Balls are used in a variety of bearing, and seal applications. These balls are precision ground for tight tolerance & are made of solid, high-quality thermoplastic.
2.What are nylon balls used for?
Nylon Balls (Zytel®, Polymide) are used in check valves, light load bearings, knobs and toggle switches and other applications where low cost and resiliency are more important than hardness. Nylon has good resistance to alkalis, petroleum products and various mild chemicals.
3.Is nylon a plastic?
Nylon is a strong, stiff engineering plastic with outstanding bearing and wear properties. It is frequently used to replace metal bearings and bushings, often eliminating the need for external lubrication.
4.What are plastic balls used for?
Because they are quiet, plastic balls are often selected for use in office furniture, bearings, medical products, and similar applications. Plastic balls are also used extensively in flow control applications, in pharmaceutical, food processing, and chemical processing equipment.
5.Why is nylon expensive?
Nylon is more expensive than polyester because the production process is more complex and uses more energy and raw materials.
6.Is nylon plastic good or bad?
In daily use, nylon is not considered toxic. However, during manufacturing or incineration, it can release harmful byproducts like formaldehyde or nitrous oxide.
Hot Tags: nylon spheres, China nylon spheres manufacturers, suppliers, factory, Solid Nylon Ball, Pa66 Plastic Ball, Polyamide 66 Plastic Ball, nylon plastic ball, Nylon White Plastic Ball, White Plastic Ball
