FG500P 3/16'' Delrin Plastic Ball
What is a Delrin ball?
Delrin Plastic Resin Balls
Polyoxymethylene (POM), also known as acetal, polyacetal and polyformaldehyde isan engineering thermoplastic used in precision parts that require high stiffness, low friction and excellent dimensional stability.
Plastic Ball can reduce the heat loss in large measure, decrease the water pollution from the acid fog, the carbon dioxide and oxygen from the air, then protect the operator's health, thus we can achieve an effect on maintaining the water quality, saving energy and purifying environment. Almost any plastic can be molded so thereare an infinite number of plastics availablefor balls. Plastic balls are typically solid,but can also be made hollow using variousmolding techniques.
FG500P 3/16'' (4.763mm) Polyoxymethylene (POM) Solid Delrin Plastic Balls advantages:
1. Large Void Space, low pressure drop
2. Low mass-transfer unit height
3.High flooding point, uniform gas-liquid contact
4.High mass transfer efficiency
5.Professional factory and high quality
6.Application temperature in media ranges from 60ºC to 150ºC.
Product Application:
Cosmetic bead bottle,lotion pump, used for liquid calibration indicators, in petroleum or acidic/alkaline liquids..
| Product Name | Plastic ball (POM, PP, PA, PTFE, ABS) |
| Specification | Φ0.8mm-Φ25.4mm |
| Grade | G0-G3 |
| Feature | Plastic balls with high hardness and rigidity, excellent abrasion resistance and lubricity, which is high density, crystallinity of linear polymers, and resistance to repeated impact, small changes in intensity |
| Applications | Mainly used in automotive, sensor, valves, pumps, sanitary ware, electronics, bearings, electrical appliances, and other industries,sliding....... |
Density: 1.4g/cm^3
Tolerance: +/-0.02 - 0.12mm
Size: 1mm - 100mm
Grade: G0-G3(0.01-0.05mm)
Our Products
Cold chain transportation of semi-finished food project
Cold chain transportation of semi-finished food project
Cold chain transportation of semi-finished food project
Company profile
With more than 25 years experience, Kaifeng Bell is a professional solid plastic ball manufacturer in China.
Material: Acetal (POM), Polypropylene (PP), Nylon (PA PA66), PTFE (Teflon), PS, PEEK, Acrylic (PMMA), etc.
Size from 0.8mm to 100mm. Grade G0 G1 G2
We have two factories to produce our balls, one is Located in Henan province (cover 10000 square meters and with more than 200 sets machines), another is located in Shandong province (cover 5000 square meters and with more than 50 sets machines)
Polyoxymethylene POM Plastic Ball FAQ
Q: What is a Delrin plastic?
A:Delrin, or POM-H (homopolymer acetal), is a semi crystalline engineering thermoplastic used for CNC machining, 3D printing, and injection molding to produce durable, precision components
FG500P 3/16'' (4.763mm) Polyoxymethylene (POM) Solid Delrin Plastic Balls FAQ
Q: Is Delrin stronger than plastic?
A: Overall, Delrin offers slight but measurable benefits in terms of mechanical strength. One negative characteristic specific to Delrin over other acetal plastics is its increased centerline porosity-an inconsistency in the center of the plastic caused by gas escape in the cooling process.
Delrin Plastic Ball FAQ
Q: Is Delrin a hard or soft plastic?
A: Chemical resistance to fuels and solvents. Low moisture absorption: Delrin can operate in wet environments with little effect on performance or dimensions. Good wear and abrasion properties - with its low coefficient of friction and hard and resilient surface, Delrin is the material of choice in many wear applications
Hot Tags: FG500P 3/16'' Delrin Plastic Ball, China FG500P 3/16'' Delrin Plastic Ball manufacturers, suppliers, factory, 10 inch plastic sphere, 12 inch plastic sphere, 24 inch plastic sphere, giant plastic spheres, plastic half sphere, Solid Delrin Ball
