Products Description
PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, HPLC columns, compressor plate valves, and cable insulation. It is one of the few plastics compatible with ultra-high vacuum applications. PEEK Plastic balls are widely used in bearing and other industry.
Our Peek Precision Plastic Ball Photos
Cold chain transportation of semi-finished food project
Cold chain transportation of semi-finished food project
Cold chain transportation of semi-finished food project
What is a PEEK ball?
PEEK Precision Balls, available in diameters ranging from 1mm to 100mm, are made from Polyether Ether Ketone (PEEK), a thermoplastic known for its excellent mechanical strength, thermal stability, and chemical resistance.
|
Product Name |
PEEK Plastic Ball |
|
Material |
Polyetheretherketone, PEEK |
|
Size |
1mm-100mm |
|
Grade |
G0-G3 (0.01-0.05mm) |
|
Density |
Around: 1.3/cm3 |
|
Color |
colorful Upon request, natural |
|
Feature |
High performance semi-crystalline thermoplastic balls, they provide high mechanical properties, dimensional stability and |
|
Application |
Special bearings, pumps and valves, components for chemical, electronic and mechanical industry when high mechanical characteristics and corrosion resistance properties are demanded. |
Peek plastic Ball Application
PEEKball has been widely used in chemical industry, electronic equipment, automobile industry, aerospace industry and other fields due to its outstanding high temperature resistance, heat resistance, high height and high formability
Peek Precision Plastic Ball Technical Specifications
|
PROPERTY |
METRIC |
UNITS |
ENGLISH |
UNITS |
|
Density |
1.23e3 - 1.32e3 |
kg/m^3 |
0.047 - 0.0477 |
lb/in^3 |
|
Yield Strength |
8.7e7 - 9.52e7 |
Pa |
12.6 - 13.8 |
ksi |
|
Tensile Strength |
7.03e7 - 1.03e8 |
Pa |
10.2 - 14.9 |
ksi |
|
Elongation |
0.3 - 1.5 |
% strain |
30 - 150 |
% strain |
|
Hardness (Vickers) |
2.56e8 - 2.79e8 |
Pa |
26.1 - 28.5 |
HV |
|
Impact Strength (un-notched) |
1.9e5 - 2e5 |
J/m^2 |
90.4 - 95.2 |
ft.lbf/in^2 |
|
Fracture Toughness |
2.73e6 - 4.3e6 |
Pa/m^0.5 |
2.49 - 3.91 |
ksi/in^0.5 |
|
Young's Modulus |
3.76e9 - 3.95e9 |
Pa |
0.545 - 0.573 |
10^6 psi |
Our factory Peek plastic ball size in stock
|
Size(mm) |
Size(inch) |
Size(mm) |
Size(inch) |
|
|
3mm |
12mm |
|||
|
3.175mm |
1/8'' |
12.7mm |
1/2'' |
|
|
3.969mm |
5/32'' |
13mm |
||
|
4mm |
14mm |
|||
|
4.763mm |
3/16'' |
14.288mm |
9/16'' |
|
|
5mm |
15mm |
|||
|
5.556mm |
7/32'' |
15.875mm |
5/8'' |
|
|
6mm |
16mm |
|||
|
6.35mm |
1/4'' |
19.05mm |
3/4'' |
|
|
7mm |
20mm |
|||
|
7.144mm |
9/32'' |
22.225mm |
7/8'' |
|
|
7.938mm |
5/16'' |
25mm |
||
|
8mm |
25.4mm |
1'' |
||
|
8.731mm |
11/32'' |
28.575mm |
1-1/8'' |
|
|
9mm |
30mm |
|||
|
9.525mm |
3/8'' |
31.75mm |
1-1/4'' |
|
|
10mm |
35mm |
|||
|
11mm |
38.1mm |
1-1/2'' |
||
|
11.1125mm |
7/16'' |
50mm |
Our plastic ball factory & quipment
Lorem ipsum dolor sit, amet consectetur adipisicing elit.
Our peek plastic ball ball size tolerance
| Grade | Tolerance range of diameter(mm) | The tolerance range of roundness(mm) |
| G0 | +/-0.0127 | 0.00635mm |
| G1 | +/-0.0254 | 0.0127mm |
| G2 | +/-0.0508 | 0.0254mm |
| G3 | +/-0.127 | 0.127mm |
Our peek plastic ball FAQ :
1. Is PEEK the strongest plastic?
PEEK is one of the strongest engineering plastics, with tensile strength comparable to or higher than reinforced grades of some metals.
2.Is PEEK better than PTFE?
Yes. PEEK has significantly higher tensile strength, stiffness and creep resistance than PTFE. It is better suited to load-bearing and structural applications
3.Is PEEK stronger than titanium?
found that titanium-PEEK (Ti-PEEK) implants are superior to traditional titanium implants in stress shielding and reducing bone resorption. Nevertheless, the mechanical strength of PEEK-based composite materials remains constrained, which is a substantial drawback with regard to long-term clinical success
4.What is PEEK used for?
PEEK is used in the aerospace, automotive, electrical, and medical industries. Because of its robustness, it is used to fabricate items the chemical and engineering industry. Common examples include bearings, piston parts, pumps, HPLC columns, compressor plate valves, and cable insulation.
Company profile
With more than 25 years experience, Kaifeng Bell is a professional solid plastic ball manufacturer in China. Material : Acetal (POM), Polypropylene (PP) ,Nylon (PA PA66) ,PTFE(Teflon) ,PS ,PEEK, Acrylic (PMMA) , etc. Size from 0.8mm to 100mm. Grade G0 G1 G2
We have two factories to produce our balls , one is Located in Henan province (cover 10000 square meters and with more than 200 sets machines), another is located in Shandong province (cover 5000 square meters and with more than 50 sets machines) As plastic ball supply ,we also produce (304 316 316L 440C 420C) stainless steel ball, brass copper ball,(soda-lime&borosilicate) glass ball,Ceramic ball ,Tungsten Carbide Ball, sattelite steel ball,Aluminum Balls . Sizefrom 0.3mm to 100mm Grade from G5 to G1000
Quality Assurance
Our technical engineer has over 30 years experience . After finished to produce balls, we will take sample balls from the batch are sent for final audit to check for surface roughness, roundness, waviness, lot size variation and hardness in a sophisticated laboratory, according to specified control plans and dock audit procedures. Once all requirements are met, a test certificate is then prepared for the customer.
Hot Tags: peek plastic ball, China peek plastic ball manufacturers, suppliers, factory
